Peak flow demand
We size to the showers, faucets, and appliances that actually run at the same time — plus Utah's cold inlet water — not a fixture count on paper.
Hot water without a storage tank
Tankless Water Heaters in Salt Lake & Utah Counties
A tankless water heater gives you long, efficient, on-demand hot water — but only when it's sized and installed for how your home actually uses water. Jetstar Plumbing and Drains evaluates the whole upgrade so you get the endless hot water tankless is known for, not lukewarm disappointment.
Licensed & insured24/7 emergency serviceServing since 2014
Understand the problem
A tankless upgrade begins with capacity and infrastructure
A tankless (on-demand) water heater warms water as it flows instead of keeping 40 or 50 gallons hot around the clock. That flips how it has to be sized: incoming water temperature, the temperature rise you need, how many fixtures run at once, your gas or electrical capacity, venting, condensate, and water quality all decide whether the unit delivers. Get the sizing right and you get endless hot water; get it wrong and you get a pricey unit that can't keep up with two showers at once.
Jetstar Plumbing and Drains helps Salt Lake and Utah County homeowners compare a tankless upgrade against a straight tank replacement, honestly. The goal is a system that supports how your household really uses hot water, fits the utilities you have, and can be maintained — not a trendy box on the wall that underperforms.
Two Utah realities matter more here than the sales brochure admits. First, cold incoming water: winter groundwater along the Wasatch Front runs genuinely cold, and a tankless unit has to raise that colder water further to reach temperature, which lowers how many gallons per minute it can deliver at once — so sizing for a Utah winter, not an average, is critical. Second, hard water: our mineral-heavy water scales the heat exchanger, and a scaled tankless unit loses efficiency and can fault out. That's why an annual descaling flush isn't optional maintenance here — it's the difference between a tankless heater lasting 20 years and dying young. We plan for both when we spec and install, and we set up the isolation valves that make future flushing quick.
Talk through the symptomsScope
What we evaluate for a tankless system
Gas or electrical capacity
Your gas meter, line size, and pressure — or electrical service — checked against the unit's real input requirements before anything is ordered.
Venting and condensate
The exhaust and intake path, condensate drainage, clearances, and mounting location planned to code before installation day.
Water quality and service access
Isolation valves and flush access built in, and our hard water accounted for, so the annual descaling that keeps a tankless alive is simple.
Know the signs
Tankless may be worth considering when
If these symptoms are active or worsening, call before water or wastewater creates a larger problem.
You keep running out of hot water
A right-sized tankless heats continuously, so long showers and back-to-back use don't wait on a tank to recover.
Mechanical space is tight
A wall-mounted unit frees up the floor space a tank occupies — useful in a finished basement or a small utility closet.
A replacement is due anyway
The moment your old tank is failing is the right time to compare — it's far cheaper to plan the infrastructure once than to switch later.
Efficiency and lifespan matter
Tankless units run efficiently and commonly last well past a tank's lifespan — but the payoff depends on proper sizing, install, and upkeep.
Straight answer on price
What a tankless water heater costs
A tankless conversion is priced around your gas or electrical capacity and venting — the unit itself is only part of it. What affects the cost:
Typical range
$3,000 – $7,000
Utah market estimate. Final cost depends on your gas or electrical capacity and venting — quoted before work begins.
Gas or electrical capacity
Upsizing gas lines or electrical service for a tankless unit is often the biggest cost driver.
Venting requirements
Tankless units need specific venting that a tank swap does not.
Sizing for demand
A unit matched to your flow and fixture count costs more than an undersized one that disappoints.
Existing infrastructure
Whether current lines and space support the conversion affects the labor involved.
Inspect → act → verify
Our tankless planning and installation process
- 01
Demand review
We talk through who's home, which fixtures run together, Utah's cold inlet water, and what you expect from your hot water.
- 02
Infrastructure check
Gas or electrical capacity, the venting path, condensate, mounting, and water connections are all evaluated before we commit.
- 03
System selection
We spec a unit that meets your real peak demand and lay out any gas, electrical, or venting upgrades — with pricing — up front.
- 04
Install and commission
The unit is mounted, connected, vented, started, tested, and walked through with you, including how the flush access works.
Why Jetstar
Service built around the line, not the sales pitch
Comparison without pressure
Jetstar Plumbing and Drains installs and services both tank and tankless, so our recommendation follows what fits your home — not what we'd rather sell.
Plumbing and utility context
We weigh the water side against fuel, venting, drainage, and Utah's hard water so the system performs and stays serviceable.
Serviceability built in
Flush valves and working clearance are part of the install, so the annual descaling that protects a tankless unit here is quick and cheap.
Local coverage
Tankless Water Heaters across our service area
Jetstar Plumbing and Drains serves all 46 municipalities in Utah County and Salt Lake County. Start with a featured local page or explore the complete county-by-county directory.
Pleasant GroveProvoOremLehiAmerican ForkDraperSandySalt Lake CitySouth JordanWest JordanSpanish ForkEagle Mountain
Explore all 46 service areas FAQ
Tankless Water Heaters questions
- A tankless conversion is priced mostly by your gas or electrical capacity, venting needs, and sizing for demand — the unit is only part of it. Call (801) 400-4008 for a quote.
Ready to solve it?
Schedule tankless water heaters
Call for current availability or send your details and Jetstar Plumbing and Drains will follow up.