Running and ghost flushing
Fill valves, flush seals, chains, and water level checked to stop the constant cycling — and the water waste — for good.
Stop the run, leak, or clog
Toilet Repair & Installation in Salt Lake & Utah Counties
Whether the toilet runs all night, rocks at the floor, leaks at the base, or won't flush right, Jetstar Plumbing and Drains figures out whether a focused repair or a replacement is the smarter money — and does it clean.
Licensed & insured24/7 emergency serviceServing since 2014
Understand the problem
Solve the symptom without overlooking the connection
A toilet is really a small system — a supply valve, tank components, porcelain, a wax or rubber seal, a floor flange, and the branch drain under it. The symptom you see might be one cheap fill-valve part, or it might be a corroded flange, a repeat clog farther down the line, or a fixture that's simply worn out. Knowing which is what keeps you from paying for a new toilet when a $15 part would do — or the reverse.
Jetstar Plumbing and Drains repairs and installs toilets across Utah County and Salt Lake County. We check the operation, the mounting, the supply, and the drainage so the recommendation fixes the whole fixture, not just the part that's easiest to see.
Hard water shapes a lot of toilet trouble here. Utah's mineral-heavy water scales up fill valves and flush-valve seats and slowly clogs the rim jets that give a bowl its swirl, so a toilet that flushes weakly often isn't broken — it's limed up. On the flip side, a toilet that runs day and night is quietly wasting a serious amount of water, which adds up fast on a valley water bill. And in older Salt Lake and Utah County homes, a toilet that rocks usually traces to a flange that's sat on a settling floor for decades. We sort out which of these you've got and fix the cause, not just the symptom.
Talk through the symptomsScope
Toilet problems we fix
Leaks at the base or supply
The base, tank bolts, and supply line evaluated to tell a failed wax seal apart from condensation or a loose connection.
Weak or incomplete flushes
Tank operation, scaled-up rim jets, and the branch drain reviewed to find the real restriction behind a lazy flush.
New toilet installation
Compatible toilets set on a properly prepped flange, sealed, bolted, connected, and tested for a solid, no-rock fit.
Know the signs
When the toilet needs professional service
If these symptoms are active or worsening, call before water or wastewater creates a larger problem.
It rocks or shifts
Movement breaks the seal and stresses the flange, letting water — and odor — escape around the floor connection over time.
The shutoff won't turn
A seized or weeping supply valve makes any repair harder and turns urgent the moment the toilet decides to overflow.
Clogs are getting frequent
Plunging the same toilet weekly points to a scaled bowl passage or a restriction farther down the branch drain — not bad luck.
Water appears around the base
Stop using it until the source is found, especially if the water could be contaminated from under the seal.
Straight answer on price
What toilet repair and installation costs
Whether it is a repair or a full replacement changes the price, so we confirm the fix first, then quote. Key factors:
Typical range
$200 – $650
Typical Salt Lake & Utah county range. Your exact price is quoted before any work begins.
Repair or replacement
A fill-valve or flapper fix is minor; a full replacement is a larger job.
Flange and seal condition
A damaged flange or subfloor under the toilet adds work beyond a simple set.
Who supplies the toilet
A customer-supplied fixture prices differently than one we provide.
Old-unit removal
Hauling away and disposing of the old toilet is part of a replacement quote.
Inspect → act → verify
Repair or replacement, based on evidence
- 01
Inspect
We check the tank, bowl, mounting, shutoff, supply, and how the drain behaves so nothing gets missed.
- 02
Isolate the cause
The technician pins down whether it's a replaceable part, a connection, a clog, or a fixture that's reached the end.
- 03
Repair or reset
Quality parts go in, or a compatible toilet is set with the flange and floor connection prepared the right way.
- 04
Test
We run multiple flushes and check the refill, the shutoff, the stability, and every connection before we leave.
Why Jetstar
Service built around the line, not the sales pitch
Drain and fixture experience
Because Jetstar Plumbing and Drains works the drains too, we can tell a toilet problem from a branch-line problem instead of guessing.
Clear repair-or-replace advice
We tell you plainly whether the unit is worth repairing or whether age, cracked porcelain, or repeat clogs make replacement the better spend.
Urgent help available
An overflowing toilet or an active leak can be handled through 24/7 emergency service — it doesn't have to wait for morning.
Local coverage
Toilet Repair & Installation across our service area
Jetstar Plumbing and Drains serves all 46 municipalities in Utah County and Salt Lake County. Start with a featured local page or explore the complete county-by-county directory.
Pleasant GroveProvoOremLehiAmerican ForkDraperSandySalt Lake CitySouth JordanWest JordanSpanish ForkEagle Mountain
Explore all 46 service areas FAQ
Toilet Repair & Installation questions
- Toilet cost depends on whether it is a repair or a full replacement, the condition of the flange and seal, and who supplies the fixture. Call (801) 400-4008 for a quote.
Ready to solve it?
Schedule toilet repair & installation
Call for current availability or send your details and Jetstar Plumbing and Drains will follow up.