Humming or jammed units
Jams and mechanical binds cleared safely from outside the grinding chamber, and the motor checked before it burns out.
Get the kitchen moving again
Garbage Disposal Repair in Salt Lake & Utah Counties
A disposal that hums, leaks, trips the reset, or leaves the sink full could be the unit, its connections, or the drain line underneath. Jetstar Plumbing and Drains checks the whole kitchen-sink setup so the fix actually holds.
Licensed & insured24/7 emergency serviceServing since 2014
Understand the problem
The disposal and drain work as one system
A garbage disposal handles small food scraps — it was never built for grease, fibrous peels, bones, or a sink full of scraps at once. Overload it and the unit jams, the motor trips, or the material moves downstream and clogs the trap and branch drain. So a sink that won't drain isn't always the disposal's fault, and swapping the unit won't fix a clog that's actually farther down the line.
Jetstar Plumbing and Drains repairs and replaces compatible garbage disposals across Utah County and Salt Lake County. We check the power symptoms, the mechanical operation, the mount, the dishwasher connection, any leakage, and the drainage below before we tell you whether it's a repair or a replacement.
Two things drive most of the disposal calls we see locally. First, grease and hard-water scale: Utah's mineral-heavy water leaves buildup in the disposal outlet and the trap, and grease that went down warm hardens there, so the unit spins fine but the sink still backs up. Second, age and the cheap builder-grade units that came with a lot of Salt Lake and Utah County homes — the motors wear, the housings corrode from the inside, and a leak eventually opens up at the body where it can't be sealed. We'll tell you honestly which situation you're in, because a $200 replacement is a waste if the real problem is a clogged branch drain, and a repair is a waste if the housing is already cracked.
Talk through the symptomsScope
Disposal issues we troubleshoot
Leaks at the mount or body
Water traced to the exact source — sink flange, dishwasher inlet, discharge slip joint, or a cracked disposal housing.
Poor sink drainage
The trap and branch line checked when the disposal spins but the sink still won't drain, so the real clog gets cleared.
Disposal replacement
Compatible units mounted, wired, aligned, and tested with your existing sink, dishwasher line, and drain for a clean, quiet fit.
Know the signs
Repair, clear, or replace?
If these symptoms are active or worsening, call before water or wastewater creates a larger problem.
The motor hums but won't turn
That's a jam — and flipping the switch again and again only overheats the motor or trips the breaker. It needs freeing, not forcing.
Water leaks from the housing
A crack or corrosion through the disposal body itself can't be sealed and points to replacement rather than a patch.
The reset button keeps tripping
A disposal that trips its reset over and over has an electrical or mechanical overload that needs diagnosing, not repeated resetting.
The sink backs up when it runs
The restriction is often in the disposal outlet, trap, or branch drain — downstream of the motor — so a new unit alone won't fix it.
Straight answer on price
What garbage disposal service costs
Disposal pricing turns on whether the unit can be repaired or should be replaced. We check that before quoting. What matters:
Typical range
$150 – $650
Typical Salt Lake & Utah county range. Your exact price is quoted before any work begins.
Repair or replace
Clearing a jam or resetting a unit is minor; a failed motor usually means replacement.
Unit and model
Horsepower and brand affect the cost when a replacement is the better call.
Wiring and plumbing condition
Old wiring or drain connections under the sink can add to the work.
Whether the drain is also clogged
A disposal problem paired with a blocked line is two issues to solve, not one.
Inspect → act → verify
Our disposal service process
- 01
Make it safe
Power to the unit is cut and confirmed before anyone touches the disposal, the mount, or the drainage under it.
- 02
Check the system
We inspect the unit, the electrical, the sink flange, the dishwasher inlet, the trap, and how the sink actually drains.
- 03
Repair or replace
We clear the jam or make the safe repair, or install a compatible replacement when the unit is past saving.
- 04
Run and test
Water, drainage, grind, vibration, and every connection we touched get run and checked before we wrap up.
Why Jetstar
Service built around the line, not the sales pitch
Drain-aware diagnosis
A new disposal won't fix a clog downstream of it, so Jetstar Plumbing and Drains checks the drain too before recommending a replacement you may not need.
Clean connection work
The mount, the discharge alignment, and the dishwasher routing are done as part of the job, not left rattling for the next person.
Practical advice
You get a plain explanation of what failed and an honest repair-or-replace call based on the unit's condition, not the bigger ticket.
Local coverage
Garbage Disposal Repair across our service area
Jetstar Plumbing and Drains serves all 46 municipalities in Utah County and Salt Lake County. Start with a featured local page or explore the complete county-by-county directory.
Pleasant GroveProvoOremLehiAmerican ForkDraperSandySalt Lake CitySouth JordanWest JordanSpanish ForkEagle Mountain
Explore all 46 service areas FAQ
Garbage Disposal Repair questions
- Garbage disposal cost turns on whether the unit can be repaired or should be replaced, plus the model and wiring condition. Call (801) 400-4008 for a quote.
Ready to solve it?
Schedule garbage disposal repair
Call for current availability or send your details and Jetstar Plumbing and Drains will follow up.